NSR-0002
2G11 55W fluorescent tubes were produced in double-digit millions every year (EU). The light source has now been phased out and we saw the need for a professional alternative to the millions of luminaires that will soon be without light.
With our AI developed Retrofit LED insert, 144 lm/W and 4,350lm are achieved. This means that the brightness is significantly higher than the old fluorescent tube and at the same time a better light quality is achieved. Finally, this LED insert comes with a smart lighting module, so the entire office lighting can meet the latest standards with daylight control.
Minimum 50% energy savings in offices
Optimal sustainability where lighting fixtures do not leave the address
Significant improvement in light quality and comfort in the office
Typical payback time without smart lighting 1-2 years and with 3.5 years
Nationwide installation cooperation (replacement throughout Denmark)
The product is fully developed with our AI model and fits perfectly in luminaires with 2G11 55W fluorescent tubes. The product comes with all safety certificates including CE certificate, RoHS directive, Declaration of Conformity for retrofit and 3rd party light measurements.
2G11 55W fluorescent tubes were produced in double-digit millions every year (EU). The light source has now been phased out and we saw the need for a professional alternative to the millions of luminaires that will soon be without light.
With our AI developed Retrofit LED insert, 144 lm/W and 4,350lm are achieved. This means that the brightness is significantly higher than the old fluorescent tube and at the same time a better light quality is achieved. Finally, this LED insert comes with a smart lighting module, so the entire office lighting can meet the latest standards with daylight control.
Minimum 50% energy savings in offices
Optimal sustainability where lighting fixtures do not leave the address
Significant improvement in light quality and comfort in the office
Typical payback time without smart lighting 1-2 years and with 3.5 years
Nationwide installation cooperation (replacement throughout Denmark)
The product is fully developed with our AI model and fits perfectly in luminaires with 2G11 55W fluorescent tubes. The product comes with all safety certificates including CE certificate, RoHS directive, Declaration of Conformity for retrofit and 3rd party light measurements.
2G11 55W fluorescent tubes were produced in double-digit millions every year (EU). The light source has now been phased out and we saw the need for a professional alternative to the millions of luminaires that will soon be without light.
With our AI developed Retrofit LED insert, 144 lm/W and 4,350lm are achieved. This means that the brightness is significantly higher than the old fluorescent tube and at the same time a better light quality is achieved. Finally, this LED insert comes with a smart lighting module, so the entire office lighting can meet the latest standards with daylight control.
Minimum 50% energy savings in offices
Optimal sustainability where lighting fixtures do not leave the address
Significant improvement in light quality and comfort in the office
Typical payback time without smart lighting 1-2 years and with 3.5 years
Nationwide installation cooperation (replacement throughout Denmark)
The product is fully developed with our AI model and fits perfectly in luminaires with 2G11 55W fluorescent tubes. The product comes with all safety certificates including CE certificate, RoHS directive, Declaration of Conformity for retrofit and 3rd party light measurements.
Tender text
LED insert to replace 2G11 55W fluorescent tubes. Equipped with energy-efficient LEDs from a recognized manufacturer. The size of the insert must be such that it fits exactly into the luminaire to be retrofitted. In addition to the fit, the LED insert must be able to be securely fastened and comply with applicable European and Danish electrical technical requirements. The consumption of the entire LED insert must be below 30W and the energy efficiency must be higher than 140 lm/W. The lumen package must be higher than 4,200lm. Construction is with clear polycarbonate front glass. The light distribution is split into two levels, forming a total 360-degree light angle. Comes with color temperature of (insert 3000K or 4000K), color rendering of (insert CRI80 or CRI90) and MacAdams SDCM Step 3. Ballast must be (insert e.g. DALI). Lifetime must be 50,000 hours at Ta = 25°C (L80) B50. It must be possible to present 3rd party independent measurements on lighting technical specifications and the manufacturer must be able to prepare a declaration of conformity for the entire luminaire after installation.
-
Energy efficient machines for handling polycarbonate
Best components from renowned manufacturers
Eco-friendly transportation via best freight forwarders
Minimizing packaging
No child labor
WEEE waste management
RoHS certification -
The product for maximum sustainability (luminaire does not leave the address)
Great ESG reporting possible
Better light quality CRI > 90
Close to 0% flicker
Highest energy efficiency on the market
Replaceable driver
Spare parts warranty 10 years
LCA reporting (TBA) -
CE Certification
RoHS Certification
Declaration of Conformity
LM79 - Light Laboratory Measurements (independent)
LM80 - LED lifetime report
TM21 - Lifetime report on respective luminaire
ENEC on driver unit -
Standard with inlet and gland. Lumega offers kits on request and with our AI model we can clone existing components for the luminaire.